Multinational
This combination of Swiss-designed frame and British engine was the result of a series of fortunate meetings and circumstances.
Words: SIMON ROBINSON
In 1967, Fritz Egli had his first go at road racing, following a short stint on grass tracks. His chosen steed was a Vincent Rapide, which he’d tuned to produce similar power to the factory’s Black Lightning-spec machines. Egli soon learned that, while his machine wasn’t left wanting in the power stakes, it left a fair bit to be desired in the handling department, especially when tackling the sharp alpine turns in Swiss hill climb events. To try to overcome this, he set about designing his own frame to house the big Vincent V-twin motor. Carrying over the Vincent design of the top tube housing the engine oil, Egli used a thin-walled, 100mm-diameter tube which ran straight along the top of the engine. The headstock was directly attached to one end, with tubes running down to the rear swinging arm at the rear. Egli also knew that the rigidity of the swinging arm was key, so he set about designing his own item there as well.
Enjoy more classic motorcycle reading, Click here to subscribe to one of our leading magazines.

With this machine, which was named “EV1” (Egli Vincent 1), Fritz won the 1968 Swiss championship, winning seven out of eight events and finishing third in the other one. With typical modesty, Egli later said the championship win was down to the far superior machine he fielded, rather than his riding prowess.
From there, he decided that he’d do a run of Egli-Vincents, but one thing Fritz Egli was struggling with in his native Switzerland was a supply of decent Vincent engines. In a parallel life, there was a man named Roger Slater. Roger was also a Vincent fan and an acquaintance of Egli through several meetings at Vincent Owner’s Club events in the late 1960s. While Egli was searching for old engines, Slater was searching for someone to make him new engines.
Roger Slater had built up a successful business supporting the service needs of Vincent owners. As the machines had been out of production for a decade by the mid-to-late 1960s, original spares were drying up, so owners were turning to pattern parts which, in a lot of cases, were just not very good. Seeing a gap in the market, Slater began having runs of parts made local to him in the Midlands, but to a quality specification that people knew could be trusted. But Roger had grander plans; he wanted to build new Vincents. While he had a decent supply of used Vincent engines that he was working on and reconditioning, he was keen to make new ones. In his search for a supplier, he contacted Massimo Laverda and arranged a trip to Breganze to talk through the possibility of Laverda making him new Vincent engines. You might remember from last month’s story of Laverda; Massimo was himself a Vincent owner. Upon arrival, Massimo suggested that what Slater needed wasn’t a new Vincent engine; what he needed was one of Laverda’s new twin-cylinder engines. To cut a long story short, Roger said that wasn’t what he needed. But it did lead to Roger and his brother Richard becoming the UK’s importer for Laverdas in the 1970s, so it wasn’t a wasted trip.
Resigned to the fact that he’d have to use reconditioned engines, Slater still needed a chassis. That’s where those meetings with Fritz Egli came in and, after some negotiations, a mutually satisfactory agreement was made. Egli would send over frames for Slater to use, and Slater would send engines and engine parts back in the van.
The first batch of 50 frames was built by Egli in Switzerland and shipped over. These were built into bikes by Roger Slater’s business. These machines are identifiable from Swiss Eglis by the bolted-on frame loop at the rear of the mudguard – more akin to a Manx Norton-style arrangement. Egli never used this method to attach the rear mudguard, preferring two separate flat bars. Other componentry was sourced from more local suppliers; Slater used Metal Profile front forks and Girling rear shocks, and instead of the exotic Grimeca cable-operated twin disc brakes Fritz Egli was using, Robinson twin- or four-leading-shoe items were used on the ‘British’ Eglis. Tanks were typically glass fibre and, generally, the machines were built and marketed more as sports-touring machines than the outright racers from Egli’s own workshops.
It soon became clear that shipping the frames over from Switzerland wasn’t really economically viable, so, after some negotiation, Fritz Egli agreed that Slater could have the frames welded up more locally to him, but only if fully approved by Egli. And so, Slater’s employee Graham Binnion was sent off to Switzerland (on Roger Slater’s BSA M21!) to learn how to weld up the frames. Sister jigs to Fritz’s own were made and verified, then Binnion was able to weld up kits of bent tubes sent over from Egli on site in Slater’s workshop.
Shortly afterwards, Binnion went his own way and so Slater needed to find a new source of the Egli frames. This time he approached renowned frame guru Eric Cheney. At this point, Slater decided to make some modifications to the original Egli frame geometry based on customer feedback he’d received. This resulted in a higher rear subframe and a slightly longer wheelbase. As these new frames couldn’t really claim to be Eglis, Slater branded them as the Shadow 70 and the Rapide 70, the latter with a slightly lower-tuned engine.
Our image comes from the 1970 launch at the Earls Court motorcycle show, where the machines stopped crowds in their tracks. But, with a hefty price tag of £785 in kit form, many of those who’d stopped probably started walking again. It’s unclear how many machines Slater manufactured, as the numbers are a little vague and memories have waned, so some figures conflict, but it’s thought that around 70 were actually assembled in the UK. It’s a fascinating tale of how two men longed to keep the Vincent engine available to buy new and, between them, they managed that for many years.





