Workshop

Q: I ran across CMM in a forum and like a parent with a poorly child I turn to you in hopes of saving my nearly-new bike. Don’t ignore me just as it’s ‘new’. I

Q: Hi, I am rebuilding a GL1100 GoldWing it has been stood since 1989 and it is fitted with a Pantera fairing, which I would like to keep on for the period look. Would you

Q: I have two valves out of a classic motorcycle (a Triumph) one and the other are the same size in all respects. The parts book gives a different parts numbers for each valve (inlet

Go to check/replace your front sprocket, grease the clutch push rod, inspect generator wiring etc. and you’re normally faced with something that looks like valve grinding paste lovingly mixed with a cow pat. And that’s

Q:  I’m getting desperate here on the garage floor with my DT400B twin shock. Over the last two years since I bought it, I’ve tried everything I can think of to stop a nasty chugging

Having owned my RD400F for 12 years I decided it was time to restore the old girl. After spending a lot of time restoring the parts, one area for real concern was to place the

Never, ever, take a brake shoe lining for granted. Almost without exception Japanese shoes are fixed to their alloy carriers by adhesive alone; you rarely see rivets used. Eventually dampness, heat and time can and

1 Locking washers were used in the past to stop nuts and bolts from coming undone, but the modern approach is to use a chemical solution: threadlocker. Do be aware of a few things though.

Aqua blasting is all the rage at the moment. I’ve been doing it for years at home using a cheap B&Q pressure washer (£25) and a sandblaster pick up lance (eBay £9.99). I used to

Q: I can’t seem to get electric power to my RD. When I turn the key I get no red or green light on the dash. This started after I hooked a charger to the