Workshop

Q: I’ve got a problem. After a run the bike is going okay, but while parked in the garage for a few days petrol leaked out through the breather pipe on to the floor. It

Q: I discovered your mag last year and a have been a reader ever since. I’m hoping, with all your years of accumulated experience, you may be able to help. CMM has inspired me to

If your bike has grease nipples use them; if it doesn’t, investigate if they can be retro-fitted. Pivot points on suspension systems need a regular supply of fresh, clean grease. Decades of dust, seasons of

Now and then you will find that a nut or bolt simply will not undo. You have tried everything: heat, penetrating oil and even an impact wrench but still the fastener remains resolutely tight. There

Q: I am having a bit of trouble with my Honda CB72, 1965 model, and I wonder if you can help. Apart from all the other work I have done for my restoration, I have

Q: My cruiser has recently developed an intermittent engine rattle, on tick-over the engine is okay, it seems to occur as I ride in top gear about 40-50mph, and as I lightly accelerate through the

Little spoils a bike like a graunching throttle. Cables are obvious and easy to lubricate but throttle tubes regularly get ignored. Whether it’s the conventional barrel type or early Japanese straight pull/scroll type the same

Q: The headlamp bowl was rusty and my mate gave me a new chrome one. Foolisly, I accepted and removed the headlamp in order to replace it. As you may know, in the shell there

Our CMM expert Steve Cooper answers YOUR questions!

Our CMM expert Steve Cooper answers YOUR questions!