Moto Guzzi V1000 Convert

Posted

by

These days you can buy a bike from Italy and have an old Guzzi delivered direct to your door. Talbot Coleman gave it a whirl

In 1999 Talbot Coleman took the plunge after 50 years of owning and riding British bikes and bought an Italian import V1000 Convert, built in 1975. Not only was Talbot taking a gamble with an import, but he also opted for one of the most unusual Guzzis going with its automatic gearbox. Talbot’s bike needed re-commissioning (headlamp, air filters, battery, fork dampers, seals, etc) and that work cost about £250 in total. So was it worth it?

Article continues below…
Advert

‘The Convert is a really nice machine’ says Talbot; ‘and incredible value for the money. Automatics have never really caught on but look at the modern range of scooters; most of them are automatic and they’re extremely popular. OK, the Guzzi does have two ratios but in real life you choose the high ratio and ride it all day as a true automatic. You only need the lower ratio for serious hill climbing. At traffic lights you apply the foot brake, wind on the revs and when the lights change you simply release the foot brake. The acceleration is astonishing.’

So has Talbot encountered any problems in the 4000 miles he’s covered in the past two years? You might expect some gremlins: after all, one of the problems of buying a recent import is that you’re unlikely to know any of its history and it may well have been standing for some time before being shipped over here. ‘On the contrary,’ reports Talbot; ‘it starts, runs and stop faultlessly. The only failure to date has been one indicator bulb! It’s very easy to control, there’s no gear changing so you just open the throttle to Go and use the linked brakes to Stop.’ So that’s one satisfied customer.

Article continues below…
Advert

RECOMMENDED MODS

  • A Tarozzi fork brace eliminates fork flex under braking (c£15).
  • Check Italian car parts when looking for consumables, especially with 1970s machines, as many spares common across motor industry.
  • Ease throttle stiffness by fitting a torsion spring inside the handlebar to keep the twistgrip open.
  • Not all modifications are improvements: unleaded valve seat conversion can be expensive and poorly finished. Aftermarket ignition systems known to fail, so some bikes now back on points/condensors.

    PEOPLE TO SPEAK TO

  • The Moto Guzzi Club GB; 43 Poplar Avenue, Bedworth, CV12 9EW. 02476 730678
  • Wessons, 01273 370962, for servicing and spares. [email protected]
  • Motomecca, 01202 823453; lots of spares in stock, very knowledgeable. www.motomeccaspares.co.uk
  • Motorworks, 01484 353602; all sorts of new and secondhand parts. www.motorworks.co.uk/guzzi

  • Advert

    Posted

    in

    Tags:

    Latest Issue

    Newsletter Signup