Mortons Archive: Military motorcycles in World War II

Posted

by

We’ve delved into the illustrious Mortons Archive to give you a glimpse into the use of Triumph and Norton motorcycles in the Second World War.

Triumph suffers with Coventry

The despatch riders of the women's Royal Naval Service taken in 1941 during World War 2.. Photo: Mortons Archive
The despatch riders of the women’s Royal Naval Service taken in 1941. Photo: Mortons Archive
July 1940; men from the second BEF, back after the evacuation from France during World War 2.. Photo: Mortons Archive.
July 1940; men from the second BEF, back after the evacuation from France. Photo: Mortons Archive.

At the outbreak of the Second World War, Triumph
was riding a wave, with their single cylinder Tigers among the best and most
attractive.

Article continues below…
Advert

Between 1938 and 1941, around 10,000 side-valve
3SWs were supplied to the British military, replacing the 3S. In 1940, the
Coventry-based factory supplied around 1,500 5SWs – but production was to end suddenly
on the night of November 14, when Germany’s bombs reigned down in the single
most concentrated attack on a British city in the war. The bombing claimed
hundreds of lives, destroyed over 4,300 homes and damaged two-thirds of the
city’s buildings, including the Triumph factory. As a result, a number of 3SWs,
the first 50 of the 3TW model – a 350cc twin which Triumph had planned to
produce in large numbers – plus tooling, plans and spares were destroyed.

Triumph moved its operation into an old foundry
building in Warwick, from where it produced the 3HW model, which was based on
the Tiger 80. Triumph eventually found a permanent new home at Meriden.

Norton’s 16H and Big 4

Long line of 16Hs and Big 4s in April 1941, during World War 2. Photo: Mortons Archive.
Long line of 16Hs and Big 4s in April 1941. Photo: Mortons Archive.
Taking aim, using one of the two-wheel drive Big 4s as cover during World War 2. Photo: Mortons Archive.
Taking aim, using one of the two-wheel drive Big 4s as cover. Photo: Mortons Archive.

For a firm that was making 4000 machines in
1935, Norton was able to claim the supply of 100,000 motorcycles to the forces
after the Second World War.

Article continues below…
Advert

The models were the 16H and Big 4, which went to
army, navy and air forces around the world. The 16H model chosen was the
pre-1937 type. If, however, a post-1938 model had been chosen by the powers
that be, they would have had the totally enclosed and fully lubricated valve
gear.

The 16H model was supplied for 10 years in
total. During the first two years of the war, it was the most popular military
motorcycle. The Matchless G3L was to push the 16H back, although some continued
on the front line.

Fusilier W Santer needs a little help from his friends; the 16H wasn't possessed of great ground clearance in World War 2. Photo: Mortons Archive
Fusilier W Santer needs a little help from his friends; the 16H wasn’t possessed of great ground clearance. Photo: Mortons Archive

Norton also supplied the Military Model 1, or Big 4 as it was to become more commonly known. With a 633cc sv engine, the machine featured drive to both the rear wheel and sidecar wheel. With the wheels locked, the outfit would only move in a straight line. The arrival of the all-round and capable American Jeep sealed the Big 4’s fate, and many wound up in the western desert towing bomb trains in Australia.

Article continues below…
Advert

Though not as glamorous, the 16Hs were supplied in 1945 and continued well into the 1950s, with Norton becoming the second largest supplier of motorcycles to the British Army.

The images used in this article are available in high-resolution for commercial and personal use. If you’re interested in purchasing these images, or want to find out more about Mortons Archive, visit www.mortonsarchive.com


Advert

Posted

in

Tags:

Latest Issue

Newsletter Signup